Real Working Site of Haomei Stationary Concrete Batching Plant

High cost effectiveness is the feature of Haoemi Stationary Concrerete Batching Plant. Special solution is our service for every customer. This is the real working site of our stationary concrete plant in Indonesia. Learn more at https://www.concretebatchplanthm.com/... or send inquiry to feedom@haomei-machinery.com

HOW TO PROTECT DIFFERENT PARTS OF SELF LOADING MIXER

With self loading, weighing, mixing, transport and discharging, one person or two workers are enough to finish a small project, therefore the self batching concrete truck is more and more popular in rural areas and remote places. Since the working environment is very poor, we need to maintain different parts properly:

• The rains will lead to the corrosion of the chassis, we need to pay attention to the cleaning and anti-rust treatment of the chassis.
• If the parts of the mixer truck are dirty, the filtering effect will deteriorate. Excessive impurities in the oil cylinder will increase the wear of the parts and increase the possibility of failure; if it is severely blocked, it will cause the self loading mixer to not work properly.
• The summer temperature is high, sometimes exceeding 35 ℃. In such season, it is necessary to strengthen the inspection and maintenance of the engine cooling system. This includes checking the water tank, thermostat, water pump, fan, etc., and pay attention to adding the cooling water in time.
• Once it is found that the hydraulic oil is mixed with water or sediment, the driver must immediately stop working to clean the hydraulic system and replace the hydraulic oil. As long as the cleanness of the hydraulic oil is guaranteed, there are not many failures.
• Regularly clean the hydraulic oil radiator to avoid the radiator being blocked by cement. Check whether the radiator electric fan is running normally to prevent the hydraulic oil temperature from exceeding the standard.

It is certain that there are many other maintenance tips. Welcome to consult us directly. If you like to know the self loading transit mixer price, welcome to leave message or email us.

Original Source: https://www.self-loading-mixer.com/a/how-to-protect-different-parts-of-self-loading-mixer.html

The Market Prospect of Self Loading Concrete Mixer Truck

For those construction professionals, they must consider the market prospect of one project. Haomei Machinery receives many inquiries on whether the self loading mixer will make money in his country and how soon it brings profit. There is our analysis:

1. Developing prospect

As we all know that, the amount of building construction has direct relationship with the level and speed of economic development. Although at present we are affected by the epidemic, the whole developing prospect is also good. The infrastructure construction in many countries is still ongoing. Many economic cooperation such as “One Belt, One Road” also has great effect on promotes local economic development.

2. Its superior performance

The self loading transit mixer integrates self loading, weighting, mixing, transport and discharging. Four wheel drive enable it go anywhere, which is suitable for self-use and renting. 270 degree discharging makes it has superior performance in narrow construction sites. It can be used for house building, roads, bridge, tunnel and slope. Compared with traditional concrete mixer or truck, it has less labor cost and investment cost.

3. High market demand

As a powerful and flexible construction equipment, the self loading mixer has been widely used in various construction projects. At present, rural area is still waiting for developing. In these regions, the construction scale is not large and there is no enough labor. Facing so many small projects, the market demand for self loading mobile concrete mixer.

To help you reduce investment, our self loading mobile concrete mixer price is much competitive. Welcome to inquire price from Haomei Machinery.

Original source: https://www.haomei-machinery.com/a/the-market-prospect-of-self-loading-concrete-mixer-truck.html

Dry Mix Concrete Plant V Wet Batch Concrete Plant

The concrete mixing plant is used to make mix sand or gravel, water, additives, fly ash, cement, etc. to produce concrete. There are two main types of concrete mixing plants: dry mix concrete plant and wet batch concrete plant. What are their differences? Let’s have a look.

Structure

The dry mix concrete plant consists of aggregate feeding system, powder feeding system, control system, batching machine, etc., but there is no concrete mixer and liquid material conveying system.

The wet batch concrete plant is mainly composed of 5 major systems: JS concrete mixer, material weighing system, material conveying system, material storage system and control system and other auxiliary facilities.

Working process

The dry batch concrete plants use electronic meters or manual meters to weigh sand, gravel and cement. After this, they will be discharged into the chute, which is discharged into the tank of the concrete mixer truck.

At the same time, the weight or volume of water is measured and discharged into the mixer truck through the same charging chute, and then all materials are mixed for at least 70 to 100 revolutions during transportation to the construction site.

But for the wet batching plant, after weighing, all the materials will be conveyed into the concrete mixer. After mixing, the concrete will be discharged into a concrete mixer truck that will transport the concrete to the construction site. During transportation, the mixer truck should rotate at an appropriate speed to prevent the concrete from coagulations.

Their Respective Advantages

Because of the special working mode, dry batching plant is suitable for the task of f providing concrete to distant transportation sites. Since the mixing is finished in the concrete mixer truck, it can save the construction period and slow down the initial setting time of concrete.

What’s more, its initial cost is relatively low. However, its capacity is not large and only suitable for those projects which has low requirements for concrete quality.

With JS concrete mixer, wet batch concrete plant can mix a variety of concrete such as fluidity, semi hard and hard concrete. More importantly, its concrete quality is very high, which can meet the requirements of different projects such as high-speed railway construction.

More than that, as the mainstream concrete batching plant, it has many models from 25 m3/h to 180 m3/h. As a concrete batching plant manufacturer, we can provide you special solution no matter you need a dry or wet batch concrete mixing plant.

Original source: https://www.concretebatchplanthm.com/a/dry-mix-concrete-plant-v-wet-batch-concrete-plant.html

JBS40 Concrete Mixer Pump Working in Indonesia

With two functions of mixing and pumping in one, concrete mixer pump is very popular in Southeas Aisa, Africa, America,etc. It is an econmoic choice for most small and medium construction contractors. Welcome to visit the details at https://www.concretebatchplanthm.com/product/jbs40-10-82r-concrete-mixing-pump.html or send inquiry to feedom@haomei-machinery.com

ANOTHER SET OF HZS50 STATIONARY CONCRETE BATCHING PLANT TO KENYA

This Kenya customer is our old customer. In the earliest time, he just bought a cement silo from us. In 2018, he bought a set of HZS25 stationary rmc plant from us. In the April 2020, our another set of hzs50 stationary concrete plant has been delivered to him.

Haomei Machinery really appreciates his trust and approval. We ever asked him why choose us. He said, it was because of equipment quality, English control system, considerate after-sale service.

Quality: The shaft end sealing technology of our mixers have our own patent. All the steel we choose for the stationary concrete batching plant is Q235. All the blades of the liner are all manganese steel. From product finishing to the finished products, all are produced by our own factory.

Control system: For many customers who are considering importing concrete batching plant from other countries, the biggest worry is whether the operation interface is meeting their habit. We have English control system for our Kenya customer who speaks English.

After-sale service: We can arrange engineers to install and debug on site until the machine runs normally. Accessories are available at any time and can be supplied to customers in a timely manner.

Professional staff: During the whole communication, our sales staff always can give sincere and professional advice on how to choose a proper stationary concrete batching plant according to his practical situation. And we are glad that with our equipment, our customer’s business is becoming better and better.

Original source: https://www.concretebatchplanthm.com/case/another-set-of-hzs50-stationary-concrete-batching-plant-to-kenya.html

JBS40 Diesel Concrete Mixer Pump Working in Africa

Haomei concrete mixer pump has two functions of concret mixing and pumping in one. It features less cost and higher efficiency. The whole working process is smooth and short. This is its working video provided by our Africa customer. If you like to know more, welcome to visit: https://www.concretebatchplanthm.com/product/jbs40-10-82r-concrete-mixing-pump.html or send inquiry to feedom@haomei-machinery.com