What Is The Application Scope of 1.8m3 Self Loading Concrete Mixer

 In the concrete construction industry, not all projects require large-scale concrete equipment. For these applications, a 1.8 m3 self loading concrete mixer is a must-have. It solves the problem of material supply difficulties and avoids the awkwardness of overkill, maximizing efficiency and cost-effectiveness.

1. Rural self-built houses/small residential construction

Rural house construction often faces two major challenges: One hand, village roads are narrow (mostly 3-4 meters wide), making it impossible for mixer trucks larger than 6 cubic meters to enter; on the other hand, the amount of material used is scattered—casting a single floor requires over 10 cubic meters of material, delivered in 3-4 batches, each batch containing just enough material to fit the 1.8m³ volume.

This vehicle has a compact body (most have a wheelbase of less than 3.5 meters), making it easy to navigate rural alleys. It also features a built-in bucket loading system: no separate loader is needed; the driver can operate the bucket to scoop sand and gravel, automatically mix and add water, and then unload the mix directly at the pouring site. This is three times more efficient than manual mixing and avoids sand and gravel waste.

2. Small municipal repair projects

Projects like hardening the base after renovating sidewalk tiles, pouring concrete around sewer manholes, and hardening walkways in residential green belts typically only require 2-5 cubic meters of concrete per project. Using a large tanker truck not only requires waiting for dispatch but also incurs "idle driving fees," making it extremely cost-effective.

A 1.8m³ self-loading truck is readily available. For example, repairing a 10-meter-long sidewalk base can mix 1.8 cubic meters at a time, completing the job in 2-3 trips. Furthermore, it can stop close to the work site, eliminating the need for wheelbarrows to transport concrete, saving labor and reducing aggregate segregation.

3. On-site secondary structure construction

On construction sites, "secondary structures" such as structural columns, lintels, and post-cast joints often only require a single pour of 0.5-2 cubic meters, but they require continuous material supply (for example, if a floor has 10 structural columns, they must be poured one by one).

Large mixer trucks deliver 6 cubic meters at a time, and by the time the first few are poured, the remaining concrete is almost setting. A 1.8-meter-capacity truck, however, can mix on demand, delivering just enough for one or two structural columns. This ensures fresh concrete and eliminates the need for frequent tank cleaning.

4. Emergency rescue projects

Road pothole repairs, concrete sealing after pipe leaks, and anti-seepage repairs on small embankments require speed—by the time a large tanker truck is contacted, the repair window may have already passed.

1.8m³ self-loading concrete mixer trucks can be driven directly to the emergency site, quickly mixing materials (such as nearby sand and gravel) on-site. For example, patching a 2-meter-wide pothole can be completed in half an hour, saving at least two hours compared to traditional processes.

Why are 1.8m³ trucks so popular with small projects?

Besides being suitable for specific scenarios, the 1.8m³ size also addresses the core needs of small projects:

Cost savings: There is no need to hire a loader driver (for self-loading) or bear the high freight costs of a large tanker truck. One truck replaces three workers (mixing, transporting, and unloading).

Easy to operate: Many models feature one-touch mixing and automatic unloading functions, allowing ordinary truck drivers to master them in just half a day of training, eliminating the need for professional mixer truck drivers.

No waste: Small projects often worry about "leftover material." 1.8m³ is just enough for a small application. Even a small amount can be used for subsequent repairs, unlike large tanker trucks, which often have 3-4 cubic meters of material left over and have to be dumped. Welcome to buy factory price self loader concrete mixer from us.

Original Source: https://www.self-loading-mixer.com/a/what-is-the-application-scope-of-18m3-self-loading-concrete-mixer.html

A Self Loading Concrete Mixer Truck Working in Projects #construction #r...

The self loading concrete mixer truck has self loading, weighing, mixing and discharging in one. It can drive flexibly in differen projects like slop protection, road building, ground hardening, tunnel, bridge construction,etc. Rich models meet the need of the projects of different scales. Welcome to learn more at our website: https://www.self-loading-mixer.com/self-loading-mixer/ or send inquiry directly to feedom@haomei-machinery.com.

Which is Better: Self Loading Mixer Truck or Concrete Mixer Truck

 In the field of construction, the mixing and transportation efficiency and quality of concrete directly affect the progress and quality of the project. In recent years, the self loading concrete mixer truck has gradually become the "new favorite" of many construction projects. So, what is its concrete mixing efficiency and quality? Compared with concrete mixer trucks, is it better?

The mixing efficiency of self-loading concrete mixer trucks is excellent. Traditional mixing equipment needs to transport raw materials separately to the mixing station, and then the mixing station mixes them uniformly, and then transports them to the construction site by concrete mixer truck. This process takes a long time.

The self loading concrete mixer integrates the functions of loading, mixing and transportation. It is equipped with an automatic loading system, which can quickly and accurately grab raw materials such as sand, gravel and cement. The entire loading process only takes a few minutes. In the mixing stage, the self-loading concrete mixer truck adopts advanced mixing devices. The special design of the mixing blades and the reasonable mixing speed enable the concrete to achieve uniform mixing in a relatively short time. It can mix 6-10 cubic meters of concrete per hour, which is 30%-50% more efficient than the traditional mixing method.

Taking a small rural self-built house construction project as an example, using a self-loading concrete mixer truck, the concrete mixing task that originally took 3 days to complete can be completed with high quality in only 1 and a half days, which greatly speeds up the construction progress.

In terms of concrete mixing quality, self-loading concrete mixer trucks also perform well. It can strictly control the ratio of raw materials, and through a precise electronic metering system, ensure that raw materials such as sand, cement, and water are accurately put into the mixing drum according to the designed ratio.

During the mixing process, the strong mixing action makes the various raw materials fully mixed, avoiding the problems of concrete segregation and insufficient strength caused by insufficient mixing.

After testing, the concrete stirred by the self-loading concrete mixer truck meets the national standards in all performance indicators, and the strength uniformity is better than that of many concrete produced by traditional mixing methods.

Compared with concrete mixer trucks, self loading transit mixer has obvious advantages. From a cost perspective, concrete mixer trucks rely on mixing stations to provide ready-mixed concrete. They not only have to pay for the concrete, but also have to bear higher transportation costs. In addition, if they encounter traffic congestion during transportation, they may also incur additional waiting costs.

The self loading concrete mixer machine can load and mix raw materials directly near the construction site, reducing the intermediate transportation links, transportation costs and time costs. At the same time, since the self-loading concrete mixer truck can flexibly adjust the mixing amount of concrete according to the actual construction needs, it avoids the waste of premixed concrete due to inaccurate planning, and further saves costs.

In terms of flexibility, once the mixing of premixed concrete transported by ordinary tank trucks is completed, the characteristics of the concrete are fixed and difficult to adjust according to the actual needs of the construction site.

However, the self batching concrete truck can adjust the concrete mix ratio and mixing time in real time according to the actual situation at the construction site to meet the requirements of concrete performance in different construction sites.

For example, when pouring beams and columns and other stress-bearing parts, the strength of concrete can be appropriately increased; when pouring the ground and other parts, the fluidity of concrete can be adjusted. In addition, self-loading concrete mixer trucks can operate smoothly in some remote areas or narrow construction sites with poor road conditions and difficult access by ordinary concrete mixer trucks, greatly expanding the scope and flexibility of construction.

Original Source: https://www.self-loading-mixer.com/a/which-is-better-self-loading-mixer-truck-or-concrete-mixer-truck.html

How to Maintain Self Loading Mobile Concrete Mixer

 Driving a self loading mobile concrete mixer is a task that requires a high level of concentration and skill, as these vehicles have important safety and stability requirements when transporting concrete. There are some tips:

1. Familiarize yourself with the vehicle: Before driving the self loading concrete mixer truck, make sure you are familiar with all the vehicle's controls and instruments and have a clear understanding of the vehicle's size, weight, and any potential mechanical issues.

2. Driver Training: Receive specialized training on how to properly operate and drive this type of vehicle. Be familiar with the driving characteristics and handling techniques of the vehicle.

3. Load limit: Strictly comply with the maximum load limit of the self loading mixer truck. Overloading reduces vehicle stability and increases the risk of accidents.

4. Vehicle inspection: Before each trip, all systems of the mixer truck must be carefully checked, including brakes, tires, suspension, mixing barrels, etc., to ensure that all equipment is working properly.

Engine maintenance

It is inseparable from engine oil. The engine oil of self-loading mixers is a consumable. For mixer trucks that are often used on construction sites, the maintenance of engine oil is even more important. So what methods can be used to extend the oil cycle of self-loading mixer trucks?

1. Prevent fuel from leaking into the oil pan, because the fuel pan will dilute the engine oil, thereby greatly reducing the viscosity of the engine oil and losing the lubrication effect prematurely. Therefore, diesel engines require sufficient fuel supply pressure from the fuel injection pump, good atomization of the injector, and reasonable throttle control to ensure complete fuel combustion.

2. Avoid operating the engine in a high-temperature environment. The engine generally requires a normal operating temperature of 80°C to 95°C. If the temperature is too high, the engine oil will become thinner and the engine oil will deteriorate faster. Once the temperature is found to be too high, it must be stopped for inspection, and normal work can continue until the fault is eliminated.

HOW TO CLEAN THE VEHICLE AFTER USING

After use, it is very important to clean the self loading transit mixer promptly and thoroughly to ensure that no concrete residue accumulates or is clogged inside the mixing drum, while maintaining the operating efficiency of the vehicle and the quality of the concrete. The following are general cleaning steps:

Drive away from the construction site: Before starting cleaning, drive the mixer truck away from the construction site to ensure that no new concrete is poured into the mixing drum.

Dumping Concrete Residues: At a cleaning station or designated dumping area, completely dump the mixer drum to remove all concrete residue.

Inject clean water: Inject an appropriate amount of clean water into the mixing drum, then start the mixing drum and let the clean water rotate in the mixing drum to clean the drum wall and mixing blades.

High-pressure flushing: If conditions permit, you can use a high-pressure water gun to flush the mixing drum to more thoroughly remove residual concrete and dirt.

Repeated cleaning: If there are still stubborn concrete residues in the mixing drum, you can clean it multiple times until the inside is clean and free of residue.

Clean the exterior: In addition to the inside of the mixing drum, you also need to clean the exterior of the vehicle, including the body and tires. Cleaning the exterior helps prevent concrete from hardening and vehicle corrosion.

Inspection and maintenance: During the cleaning process, check the hydraulic system, rotating device and other key components of the mixer truck for abnormalities or damage. If problems are found, repair them in time.

Storage and maintenance: After cleaning, the self propelled concrete mixer truck should be stored in a dry, well-ventilated place. Carry out regular maintenance and upkeep on the mixer truck to ensure long-term reliable operation of the vehicle.

At the construction site, there should be a designated cleaning area to avoid direct discharge of sewage into the environment. In addition, relevant safety operating procedures must also be followed to ensure that no harm is caused to operators during the cleaning process.

Haomei Machinery has rich models of self loading concrete mixer trucks. Welcome to leave message below to inquire self loading rc concrete mixer truck dimensions and other information.

Original Source: https://www.self-loading-mixer.com/a/how-to-maintain-self-loading-mobile-concrete-mixer.html

How to Maintain Self Loading Mobile Concrete Mixer

 Driving a self loading mobile concrete mixer is a task that requires a high level of concentration and skill, as these vehicles have important safety and stability requirements when transporting concrete. There are some tips:

1. Familiarize yourself with the vehicle: Before driving the self loading concrete mixer truck, make sure you are familiar with all the vehicle's controls and instruments and have a clear understanding of the vehicle's size, weight, and any potential mechanical issues.

2. Driver Training: Receive specialized training on how to properly operate and drive this type of vehicle. Be familiar with the driving characteristics and handling techniques of the vehicle.

3. Load limit: Strictly comply with the maximum load limit of the self loading mixer truck. Overloading reduces vehicle stability and increases the risk of accidents.

4. Vehicle inspection: Before each trip, all systems of the mixer truck must be carefully checked, including brakes, tires, suspension, mixing barrels, etc., to ensure that all equipment is working properly.

Engine maintenance

It is inseparable from engine oil. The engine oil of self-loading mixers is a consumable. For mixer trucks that are often used on construction sites, the maintenance of engine oil is even more important. So what methods can be used to extend the oil cycle of self-loading mixer trucks?

1. Prevent fuel from leaking into the oil pan, because the fuel pan will dilute the engine oil, thereby greatly reducing the viscosity of the engine oil and losing the lubrication effect prematurely. Therefore, diesel engines require sufficient fuel supply pressure from the fuel injection pump, good atomization of the injector, and reasonable throttle control to ensure complete fuel combustion.

2. Avoid operating the engine in a high-temperature environment. The engine generally requires a normal operating temperature of 80°C to 95°C. If the temperature is too high, the engine oil will become thinner and the engine oil will deteriorate faster. Once the temperature is found to be too high, it must be stopped for inspection, and normal work can continue until the fault is eliminated.

HOW TO CLEAN THE VEHICLE AFTER USING

After use, it is very important to clean the self loading transit mixer promptly and thoroughly to ensure that no concrete residue accumulates or is clogged inside the mixing drum, while maintaining the operating efficiency of the vehicle and the quality of the concrete. The following are general cleaning steps:

Drive away from the construction site: Before starting cleaning, drive the mixer truck away from the construction site to ensure that no new concrete is poured into the mixing drum.

Dumping Concrete Residues: At a cleaning station or designated dumping area, completely dump the mixer drum to remove all concrete residue.

Inject clean water: Inject an appropriate amount of clean water into the mixing drum, then start the mixing drum and let the clean water rotate in the mixing drum to clean the drum wall and mixing blades.

High-pressure flushing: If conditions permit, you can use a high-pressure water gun to flush the mixing drum to more thoroughly remove residual concrete and dirt.

Repeated cleaning: If there are still stubborn concrete residues in the mixing drum, you can clean it multiple times until the inside is clean and free of residue.

Clean the exterior: In addition to the inside of the mixing drum, you also need to clean the exterior of the vehicle, including the body and tires. Cleaning the exterior helps prevent concrete from hardening and vehicle corrosion.

Inspection and maintenance: During the cleaning process, check the hydraulic system, rotating device and other key components of the mixer truck for abnormalities or damage. If problems are found, repair them in time.

Storage and maintenance: After cleaning, the self propelled concrete mixer truck should be stored in a dry, well-ventilated place. Carry out regular maintenance and upkeep on the mixer truck to ensure long-term reliable operation of the vehicle.

At the construction site, there should be a designated cleaning area to avoid direct discharge of sewage into the environment. In addition, relevant safety operating procedures must also be followed to ensure that no harm is caused to operators during the cleaning process.

Haomei Machinery has rich models of self loading concrete mixer trucks. Welcome to leave message below to inquire self loading rc concrete mixer truck dimensions and other information.

Original Source: https://www.self-loading-mixer.com/a/how-to-maintain-self-loading-mobile-concrete-mixer.html

What Are Features of Mobile Self Loading Concrete Mixer Truck

 The main structure of the mobile self loading concrete mixer truck consists of a walking chassis, an engine, a hydraulic torque converter, a front and rear double drive axle, a feeding device, a feeding hopper, an unloading hopper, an extended unloading hopper, a mixing drum, a special reducer for mixing, hydraulic system, electric control system, automatic water supply system and other components.

1. The rotation of the mixing drum of the self loading transit mixer is driven by the motor through a special planetary reducer, and the output shaft of the planetary reducer can swing at a certain angle to meet the beating of the mixing drum under severe road conditions.

2. The hydraulic system adopts a constant power variable plunger pump to reduce the power loss of the engine.

3. The walking system adopts the drive form of front and rear double axles. The hydraulic torque converter is used to reduce the impact on the engine and prolong the life of the engine.

4. Dry material feeding is automatically fed by the shovel arm, boom cylinder and quantitative hopper according to the designed ratio.

5. The water inlet system can realize automatic water inlet according to the measurement setting.

6. Double helical blades are installed on the inner wall of the mixing drum of the self loading concrete mixer. The forward rotation is for feeding and concrete mixing while the the reverse rotation is for discharging.

Due to the adoption of the twin-shaft mixer, the volume of the tank is increased and the overall size of the vehicle is reduced. In addition, the non-load-bearing body structure is adopted in the chassis design, so that the vehicle has the characteristics of high strength and low center of gravity. At the same time, the hydraulic power steering system is used in conjunction with the gearbox driven by the hydraulic torque converter to improve the handling stability of the vehicle.

Since the traditional hydraulic transmission is replaced by mechanical transmission (that is, the hydraulic system drives the reduction box to control the speed of the vehicle), the operation in the cab is simpler and more convenient. At the same time, due to the cancellation of the power transmission link between the hydraulic torque converter and the engine and the power take-off switch and other mechanisms, the power loss caused by power transmission loss is reduced.

Haomei Machinery has complete models. Welcome to leave message below to inquire the price of self-loading concrete mixer.

Original Source: https://www.self-loading-mixer.com/a/what-are-features-of-mobile-self-loading-concrete-mixer-truck.html

The Economic Analysis of Self Loading Concrete Mixer

 Fresh, quick and good grade concrete is vital for the construction quality. Which equipment can make it? That is self loading concrete mixer for sale. It is easy to use due to its self loading design. It is also of four wheel drive, so the concrete is available wherever it is needed. How about its profit analysis? Take the 2m3 self loading concrete mixer for example.

1. It has self loading, weighing, mixing, transport and discharging in one, saving the cost of purchasing a loader.

2. The concrete cost will be decreased a lot. 1 m3 concrete needs about 250-400 kg cement. The production cost of 1m3 concrete will be about £50-60. The price of commercial concrete in the UK is £100-120. You can save a lot.

3. The self loading mixer can mixer 1 batch very 15 minutes (including round-trip). The actual mixing volume per hour is ≥8m3, the whole day (calculated by 8 hours) is not less than 70m3, and the daily fuel consumption (diesel) is not more than £53.

4. Two workers are enough to cooperate, which is 4-7l workers less than that of the traditional construction ways.

5. Build a road with a length of 7 km, a width of 3m and a thickness of 20cm or a square of 20,000 m3, which can recover the purchasing cost of a self loading concrete mixer truck.

6. In the spare time, it can be rented in the local construction project rental market, and the fee is £750 a week.

7. It doesn’t rely on the electricity and has excellent climbing ability, so it is widely used in mountainous area and rural areas.

8. It is widely used for various projects including road construction, house building, tunnel, bridge, slope protection, transmission line, warehouse, ground hardening, etc.

Haomei Machinery has rich models of self loading transit mixers for you to choose from. Welcome to leave message below to inquire what you need.

Original Source: https://www.self-loading-mixer.com/a/the-economic-analysis-of-self-loading-concrete-mixer-for-sale-uk.html

Why Do You Need Self Loading Concrete Mixer Machine

 In the past, the concrete production process was to load sand, cement, stones, water and other materials into a traditional mixer in proportion. After completion, the finished concrete is unloaded from the mixer, loaded into a transport truck, and the concrete is transported to the construction site. The whole process is time-consuming and laborious, and relies heavily on AC power, which is not conducive to field construction and also increases energy consumption. That’s why the self loading concrete mixer machine is developed.

The self loading concrete mixer machine is is a kind of construction machinery, combining the loader and the concrete mixer, which is widely used in the field of concrete construction. It has self loading, weighing, mixing, transport and discharging in one.

Its basic feature is four wheel drive and 270 degree discharging. This makes it have superior traffic capacity in the mountainous area and narrow construction site. In addition, theapplication of the fully automatic self loading mixer truck can be extended to occupations other than concrete such as refractory materials and other powdery materials. Its maximum climbing angle of up to 30%, which can easily cope with construction in complex environments.

The self loading concrete mixer can fully meets the concrete need of such projects like road repair, ditch construction, urban construction maintenance, municipal engineering construction, tunnel construction and other engineering projects.

How to choose a reliable one? A reliable manufacturer will save you a lot of troubles. Haomei Machinery is a special self loading concrete mixer manufacturers in China.When selecting, we must fully consider the braking performance of the machine, which has a close relationship with our safety. Before choosing, you can learn more about the details with our sales.

Original source: https://www.concretebatchplanthm.com/a/why-do-you-need-self-loading-concrete-mixer-machine.html

Self Loading Concrete Mixer in Sri Lanka

The self loading concrete mixer is a versatile concrete equipment having self loading, weighing, mixing, discharging and transport. With four wheel drive and no need for electricity, it is a popular choice in mountainous countries.

In March 2021, Haomei HM2.0 self loading concrete mixer truck was delivered to the Sri Lanka. Its discharging volume is 2.0 m3 and the whole cycle from loading to discharging takes 12-15 minutes. The hourly output is 8-10 m3.

Sri Lanka is located in South Asia, in the North Indian Ocean south of the Indian Peninsula. It is the largest island in South Asia. It is known as the "Pearl of the Indian Ocean". Sri Lanka is a mainland island. The central part of the island is dominated by mountainous terrain, with rugged terrain.

With this self loading concrete mixer truck, our customer can easily get concrete anytime with low labor cost and only raw material cost. It not only helps to improve construction efficiency, but also expands the profit.

Haomei Machinery can customize for you according to your specific requirements such as cooling device, rotating cab, discharging degree,etc. Welcome to leave message below to inquire what you need.

Original Source: https://www.self-loading-mixer.com/a/self-loading-concrete-mixer-in-sri-lanka.html

What Is Structure of Self Loading Concrete Mixer

 The self loading concrete mixer machine is a construction equipment that combines the functions of concrete truck and concrete mixing plant. It can self load, weight, mix, transport and discharge by itself. Equipped with a hydraulic electronic scale, it can accurately measure the stones and sand when loading, and automatically quantify the water, so that the concrete ratio is more standard.

Its powerful function is indispensable from its reasonable structure. Haomei self loading mixer is made up of walking chassis, engine, hydraulic torque converter, front and rear four-wheel drive, loading device, feed hopper, discharge hopper, extended discharge hopper, frame, mixing tank, mixing special planetary reducer, hydraulic system, electronic control system, automatic water supply system and other components(as shown in the picture).

1. Hydraulic oil tank (left), diesel tank (right) 2. Rear drive wheel 3. Turntable 4. Water tank 5. Mixing tank support 6. Front drive wheel 7. Pull rod 8. Lifting cylinder for boom 9. Connecting arm 10. Main boom 11. Hopper 12. Hopper gate cylinder 13. Retractable hopper cylinder 14. Cab 15. Discharging funnel 16. Mixing tank 17. Mixing tank cylinder 18. Mixing tank reducer 19. Hydraulic motor 20. Hood

Walking System

The power of walking system is from the engine through the torque converter, front and rear drive shafts to the front and rear axles. The hydraulic steering four-wheel drive mode is adopted, which greatly reduces the turning radius and is more suitable for narrow construction site.

The hydraulic torque converter is used to reduce the impact on the engine and prolong the life of the engine. The stepless variable speed electric control valve is convenient to control.

Mixing Drum

The rotation of the mixing tank is driven by a hydraulic motor through a special planetary reducer. The output shaft of the planetary reducer can swing at a certain angle to meet the beating of the mixing tank under bad road conditions. The mixing tank of the self loading concrete mixer machine is equipped with a speed control valve, which can accurately control the mixing speed of the mixing tank.

Self Load and Discharge

The feeding hopper is installed obliquely to ensure smooth feeding. The discharging trough used for discharging can be rotated and fixed in place by a locking mechanism. The extended trough used to lengthen the length of the discharge chute can be folded and placed in its fixed position, and fixed on the discharge chute with a hook.

Original source: https://www.concretebatchplanthm.com/a/what-is-structure-of-self-loading-concrete-mixer.html