Why Choose Self Loading Concrete Machine for Road Construction

 Road construction is an important part for the remote or mountainous areas, which will not only facilitate their life and travel, but also contributes to developing tourism and other economies. But since the rural projects always face to a lack of workforce, a highly automatic construction machine is needed.

At present, there are three ways to get concrete: buying commercial concrete, concrete mixer or manual operation. As we know, for small projects, buying commercial concrete will bring exacerbate budgetary constraints. The using of concrete mix and manual operation is of low efficiency. That’s why the self loading concrete machine is popular in rural road construction.

The self loading concrete machine is of self loading, weighing, mixing, transport and discharging. It can discharge with 270 degrees over driving. More importantly, its mixing quality can fully meet the road construction.

Under normal circumstances, C25 concrete can be used in rural road construction, but if it is a section where large vehicles are allowed to pass, C30 and C35 concrete with higher hardness is required. The thickness of rural roads is basically 20 cm, and 0.6 cubic meters of concrete is needed to build a one-meter road. A mini self loading concrete mixer such as HM2.0 self mixer is OK.

It can produce concrete with different hardness according to the required concrete model. It comes with an accurate industrial electronic scale. It can have a strict control of each material according to the concrete ratio. In addition, it has a strong mixing technology, which ensure the quality of concrete.

The mini self loading concrete mixer enable the construction contractors get concrete at the price of raw material. Its price is one-fourth of the commercial concrete price. Its efficiency is several times that of a concrete mixer. Welcome to leave message below to inquire it.

Original Source: https://www.self-loading-mixer.com/a/why-choose-self-loading-concrete-machine-for-road-construction.html

How to Prevent Self Loading Concrete Machine from Sticking

When using self loading concrete machine, some customers reflects that the tank body is getting smaller and smaller. The reason is that the concrete material is stuck to the wall of the tank without cleaning.

After the long use of self loading mixer, sometimes the inside space of the mixing drum will become smaller and smaller due to the inadequate cleaning of the tank body. This will undoubtedly affect our normal use. How to prevent the concrete sticking?

1. Check the concrete quality before leaving the factory

May be due to different raw materials, each batch of concrete quality will be different. When feeding the concrete and leaving the site, be sure to check the slump of the concrete in the tank in case of consolidation and education.

2. Check the amount of water in the water tank

Every time when the driver gets back, check the water volume in the water storage tank to keep it full at any time to prepare for unexpected needs.

3. Reduce transportation time as much as possible

The concrete transportation distance is generally within 30 kilometers in diameter. The driver had better plan the route and have a good knowledge of the traffic situation before leaving the vehicle. Try to choose a short route and a good road condition to drive.

4. Unload to reduce losses in case of accidents

If you encounter man-made factors or majeure factors that make it impossible to unload the material for a long time, you should always check the concrete in the tank. Once the concrete is found to start to set, unloading should be carried out immediately after reporting to the person in charge.

If you like to buy a self loading concrete mixer, welcome to leave message blow or email us to get the self loading mobile concrete mixer price.

Original Source: https://www.self-loading-mixer.com/a/how-to-prevent-self-loading-concrete-machine-from-sticking.html