The Broad Application of Self Concrete Mixer Truck

 The self concrete mixer truck is a special vehicle for long-distance concrete transportation. The vehicle can still mix the concrete during the driving process, so it has the dual functions of transportation and mixing. What are its popular applications?

Feed mixing

Some large feed factories can also use this for feed mixing, which saves time and labor, reduces personnel costs, and has a good control over the ratio of feed.

Tunnel

In view of the narrow space of mine tunnels, poor road conditions and the possibility of gas explosions, it is necessary to develop special concrete mixer trucks for transportation. The height and width of of this self concrete mixer truck are limited to 2.5 meters and 2.2 meters, respectively. It uses a hydraulic motor four-wheel drive, which can provide greater torque to the chassis.

Road building

Under normal circumstances, C25 concrete can be used in rural road construction, but if it is a section where large vehicles are allowed to pass, C30 and C35 concrete with higher hardness is required. The thickness of rural roads is basically 20 cm, and 0.6 cubic meters of concrete is needed to build a one-meter road. The self loading concrete mixer can fully meets this need.

Transmission line

The transmission line usually has long length, large number of foundations and small volume of single foundation concrete. It is likely to pass some electricity-backward regions are mountainous areas. The self loading transit mixer can help to get concrete anytime and anywhere.

Ground hardening

At present, many factories, village courtyards, parking lots, squares and other constructions need to turn soil ground into cement ground, which is more convenient for people to work and live. Since the self batching concrete truck can produce concrete and move automatically, it is much favored in this aspect.

Haomei Machinery has different models with hourly output 5-30 m3/h. Welcome to leave message below to inquire what you need.

Original Source: https://www.self-loading-mixer.com/a/the-broad-application-of-self-concrete-mixer-truck.html

HOW TO PROTECT DIFFERENT PARTS OF SELF LOADING MIXER

With self loading, weighing, mixing, transport and discharging, one person or two workers are enough to finish a small project, therefore the self batching concrete truck is more and more popular in rural areas and remote places. Since the working environment is very poor, we need to maintain different parts properly:

• The rains will lead to the corrosion of the chassis, we need to pay attention to the cleaning and anti-rust treatment of the chassis.
• If the parts of the mixer truck are dirty, the filtering effect will deteriorate. Excessive impurities in the oil cylinder will increase the wear of the parts and increase the possibility of failure; if it is severely blocked, it will cause the self loading mixer to not work properly.
• The summer temperature is high, sometimes exceeding 35 ℃. In such season, it is necessary to strengthen the inspection and maintenance of the engine cooling system. This includes checking the water tank, thermostat, water pump, fan, etc., and pay attention to adding the cooling water in time.
• Once it is found that the hydraulic oil is mixed with water or sediment, the driver must immediately stop working to clean the hydraulic system and replace the hydraulic oil. As long as the cleanness of the hydraulic oil is guaranteed, there are not many failures.
• Regularly clean the hydraulic oil radiator to avoid the radiator being blocked by cement. Check whether the radiator electric fan is running normally to prevent the hydraulic oil temperature from exceeding the standard.

It is certain that there are many other maintenance tips. Welcome to consult us directly. If you like to know the self loading transit mixer price, welcome to leave message or email us.

Original Source: https://www.self-loading-mixer.com/a/how-to-protect-different-parts-of-self-loading-mixer.html