How to Use Concrete Mixer Self Loading

 Haomei concrete mixer self loading replaces the functions of loaders, mixers, transport vehicles, generator sets, etc. It also comes with a water tank and an external suction pump, which helps to save a lot of money. It can also discharge 270 degree.

Operating skills

1. Start the button of the self-loading concrete mixer truck and adjust the rotation speed of the motor.

2. During the mixing process of the self loading concrete mixer, it needs to run at a uniform speed, and there is no abnormal noise when mixing the materials.

3. After the materials are mixed, check whether the equipment is completely stopped when discharging the concrete.

4. After the feeding is completed, we must close the feeding port of the self loading concrete mixer truck.

Cleaning methods

1. Use a good cleaning solution and appropriate dosage. You can refer to the instructions of the cleaning solution, and the amount should be appropriate, otherwise the chemical composition in the cleaning solution will damage the mixing tank.

2. We generally use common alkaline solution. Do not use cleaning products with high chemical composition and high concentration.

Braking skills

If you want to master good driving skills, it’s far from enough to just step on the accelerator and steer the direction. Braking skills are not only a matter of comfort, but also a guarantee of safety. There are two braking tips.

1. To overcome the fear that the self loading transit mixer will not stop and hit the car in front or an obstacle;

2. It is necessary to control the strength of the right foot on the brake pedal that first slowly increase the force, and then slowly retract the force.

Haomei Machinery has different models of self loading concrete mixer. Welcome to leave message below to get a transport mixer quotes.

Original Source: https://www.self-loading-mixer.com/a/how-to-use-concrete-mixer-self-loading.html