What Is the Disadvantages of Self Loading Concrete Mixer

With the mature technology in recent years, the self loading concrete mixer becomes a hit in the production of concrete. With the the increasingly strict environmental protection, it has leapfrogged the commercial concrete plant and traditional mixing method.

Many people choose to buy it over its high efficiency and great convenience. Then do you know about its disadvantages?

Firstly, When loading, the sand and stones will make friction with the loading bucket, and scratches will be formed on the bottom and inside of the bucket. In addition, we should pay attention to the screw parts.

As we all know, the road conditions for the self loading mixer is usually poor such as rugged county road or mountain road. The poor road conditions and frequent vibration brought by the mixing will cause the loosing of the screw parts. This will influence the working efficiency. Therefore, we need to check termly and tighten loose screws to avoid failure.

Secondly, the air filter and diesel filter of the self loading mixer machine needs to be checked from time to time. Once the air filter and diesel filter are blocked, it will cause the decline of engine power and the wear of internal parts. Frequent replacement and maintenance will avoid such problems.

Brake pads, shock absorbers, fuel pumps also need to be replaced, repaired and cleaned after a certain period of use to ensure construction safety.

From the above discussion, we can find that except the scratch, most problems can be avoided by the regular maintenance. It is certain that choosing a quality self loading concrete mixer is an important premise.

The tank material of Haomei self loading mixer adopts high-strength manganese steel, which is of strong ability to withstand impact, extrusion and abrasion. Even with scratch with the raw material, it will affect its daily operation.

The last but not least, the self loading concrete mixer is a small model with capacity ranging from 1.2 m3/h to 6.5 m3/h. If your needed amount is far larger, there will be no suitable models for you and it will be not an economic choice any more. As a special self loading concrete mixer manufacturer, Haomei has eight models for you to choose from.

Original Source: https://www.self-loading-mixer.com/a/what-is-the-disadvantages-of-self-loading-concrete-mixer.html

How to Choose a Right Mobile Concrete Plant According to Your Own Needs

A mobile concrete batching plant well matched with your own needs is a right choice. How to purchase one according to your practical need? There are four tips for you.

1. The choice of concrete mixer according to the concrete type

The concrete mixer is the key part of mobile concrete plant. The type of concrete mixer should be selected according to the concrete type. For example, for water conservancy projects, twin shaft concrete mixer must be selected. In addition, the concrete batching machine and cement silo should be selected according to the types of raw material.

2. The choice of portable concrete plant model according to the work amount and period

These two parameter is to decide how large the portable concrete mixing plant will be. In the selection, the transportation condition of the finished concrete should also be considered. Is it directly pumped or transported to the near construction sites? The volume of the conveying vehicle is also an important factor to help decide the model.

3. Operator quality affects the choice of large or small concrete batch plant

Generally speaking, the small concrete batch plant is of simpler structure and simple control system, so it has low maintenance for the personnel. The large concrete plant is of complicated structure and high automation, so the requirements for operators are also high. When you buy one, you also need to consider this factor.

4. Are there any special requirements?

In general, the concrete batching plant manufacturers have mature equipment configurations, such as specifications, quantities, and varieties. You can also make special requirements when ordering mixing equipment, and Haomei Machinery will try our best to meet your requirements. Don’t pursue larger model than that you really need, it will cause unnecessary costs.

Original source: https://www.concretebatchplanthm.com/a/how-to-choose-a-right-mobile-concrete-batching-plant-according-to-your-own-needs.html

Where to Build Batch Type Asphalt Plant

With the rapid development of infrastructure in many countries, the need for batch type hot mix plant is stronger. Many customers are planing to invest in them. In this process, it is very important to choose a proper location.

Generally speaking, if you want to choose a suitable construction site for stationary asphalt plants, there are four main aspects:

Firstly, the manager needs to know clearly the distance between the asphalt mix pant and the construction sites for the transportation distance of asphalt as a raw material directly affects the quality of asphalt.

The plant builder needs to confirm the distribution of the asphalt according to the construction drawings, so that it can be positioned to the approximate center position of the asphalt mixing plant.

Secondly, the asphalt plant builder needs to master the basic elements of the asphalt mixing station, such as the water, electricity, and floor space required during the operation of the asphalt batch plant.

Thirdly, pay attention to the surrounding environment of the construction site. Since there is some pollution like dust and noise generated during processing, it is better to be far away from schools, residents’ living areas and farmland. As a asphalt batch mix plant manufacturer, Haomei Machniery has the most Eco-friendly dust-collecting system, reducing the pollution to the minimum.

The last but not least, the site selected for the construction of asphalt plant can be divided into soft foundation and solid earth. Since batch type asphalt mix plant has strong vibration power on the ground, extra reinforcement measures need to be done for soft foundation.

Original source: https://www.concretebatchplanthm.com/application/where-to-build-batch-type-hot-mix-plant.html

HM4.0 Self Concrete Mixer Machine

This is our test video of HM4.0 self concrete mixer machine. Do you need it or do you like to know about it? Welcome to send inquiry to feedom@haomei-machinery.com or visit our website: :https://www.self-loading-mixer.com/hm40-self-mixer/

How to Operate HM2.0 Self Loaind Mixer

This is a test video of HM2.0 Self Loading Mixer. If you like to get the self loading concrete mixer price, welcome to send inquiry to feedom@haomei-machinery.com or you can visit our website: https://www.self-loading-mixer.com/hm20-self-mixer/

WHAT ARE THE POPULAR KINDS OF THE CONCRETE PUMPING EQUIPMENT

A concrete pumping equipment is used for transferring liquid concrete by pumping. For meeting different requirements and different construction scale, there are four main kinds of concrete pumping equipment.

1. Concrete Mixing Pump

The concrete mixing pump is a combination of concrete mixer and concrete pump. Compared with other concrete pumps, it has the mixing function. The overall efficiency is over the trailer pump.

2. Trailer Concrete Pump

Trailer concrete pump,also called line pump, can be towed to the work site by the truck. Compared with other pumping equipment, its operation cost is the cheapest. So if you have concrete mixer and many small construction projects, it is a very economic choice. Its shortage is its pumping speed is a little sow and is pumping height is not as high as the concrete pumping truck.

3. Truck Mounted Concrete Pump

Compared with concrete pumping truck, truck mounted concrete pump don’t have supporting leg and long boom, so its price is relatively cheap. But the labor intensity of the worker is relatively large. In addition, if the high-pressure pipe is used for the truck mounted concrete pump, its pumping height is also very high.

4. Concrete Pumping Truck

Concrete pumping truck has another familiar name, that is, concrete boom pump. It has supporting legs and booms, so it can transport concrete without laying pipelines. Concrete boom pump is of highest flexibility and highest speed among the four pumping equipment. However, its maintaining and operation cost is relatively high. And because of the operation height, it is more demanding on the construction sites.

After all, you need to choose a proper one according to your practical need and budget. Haomei Machinery has all these four kinds of concrete pumping equipment. Welcome to leave message here.

Original source: https://www.concretebatchplanthm.com/a/what-are-the-popular-kinds-of-the-concrete-pumping-equipment.html

DO YOU REALLY TRAILER LINE PUMP

Trailer line pump is the main and economic concrete pumping equipment. There are so many models and many manufacturers. If you like to buy concrete trailer pump, you need to have a better knowledge of its main technical parameters.

Generally, a trailer concrete pump has the following main technical parameter: the pumping output, outlet pressure, power and distribution valve. These several main parameter can be know the model of the pump.

Take the HBT60S1413-112R trailer line pump for example. The portion of HBT in the model means it is a trailer concrete pump; the portion of 60 refers to its pouring output; 1413 refers to its high and low pressure;112 R refers to the diesel motor with power of 112 kw.

As for how large a motor you should choose, you first need to consider transformer capacity and then the pumping distance. The motor power is a prerequisite for determining the outlet pressure and the amount of delivery. Under the condition of a certain motor power, an increase in pressure will definitely reduce the delivery volume; on the contrary, reducing the outlet pressure will make the delivery volume increase.

In order to have large pumping volume and a certain outlet pressure, most small trailer concrete pump adopt constant power pump. It is of a constant power value. When the outlet pressure rises, the output volume of the pump will automatically decrease to reach the value corresponding to the power design. If you like to get high outlet pressure and high output volume, the only way is to increase the motor power.

Original source: https://www.concretebatchplanthm.com/a/do-you-really-trailer-line-pump.html